The Adams-Rite style latch is the one in use in any aluminum framed door such as the one at your local 7-11 or any other retail shop. The Peterson Deadbolt bypass kit overcomes problems encountered using other tools. The five varying wire designs allow egress into key ways as narrow as 0.035, while the memory in the Peterson quality wire allows extended use of the tools. Named for the short in and out pushing action required to deflect the wires down off the opposing cylinder, these tools plus a little practice can allow entry into a door with an Adams-Rite type hook or deadbolt in as little as 15 seconds! Peterson’s tool handles provides the leverage you need to control and manipulate the tool, while the selection of five tools insures you that you always have the right tool for the job. The selection of wires allows the locksmith to fine tune the configuration of the wires to work the way they the locksmiths need them. Learning this valuable lesson about adjustment allows intimate knowledge of these tools, and insures competency in use, and the skill for continued professional success.
IT IS HIGHLY RECOMMENDED THAT THE ENTRY SPECIALIST GAINS PRACTICE AND EXPERIENCE WITH THIS FINE SET OF TOOLS PRIOR TO A REAL WORLD ENTRY! While they will faithfully perform as advertised, familiarity and practice on a lock and cylinders assembled out of the door is very important, and will lead you to immense satisfaction. Detailed instructions are included.